How to HP Officejet 3830 Wireless Setup

HP Officejet 3830 Wireless Setup

Remove all packaging materials, attach the cable, insert the incubator cartridges and then load the paper into the input tray to create a printer for the first time.

Step 1: Unpack the box’s printer

  • Remove the printer from the package and remove all printer cassettes, sticks and packaging materials.
  • Disable the box printer.
  • Remove from the outside of the printer all the tape and packaging materials and open the outside door.
  • Figure: Detach the tape and open the door outside.
  • Remove the tape and wrapping material from the entrance door of the ink cartridge.
  • Figure: Remove the tape and packaging material from the entrance door of the ink cartridge
  • Open the access door to the ink cartridge; remove from the printer the tape and the packaging materials.
  • Figure: Extract from inside the printer the tape and packaging content
  • Open the entry door of the tin cartridge, and then close the outside door.
  • Figure: Close the entrance door of the ink cartridge and closing the outside door

Step 2: Attach the cable, set the country/region, time and date, and then the language

  • Turn on the printer and then enter your localization settings. Attach the power cord.
  • Attach the power cord to the back of the printer, and attach to an electrical outlet the other end of the power cord.
  • Figure: Power cord link
  • To activate the printer, push the Power button.
  • Photo: Push the button Strength
  • The Language menu appears on the printer control panel.
  • Choice your language Figure:
  • To confirm your pick, tap your preferred language, and then press yes.
  • The menu shows Country/Region.
  • To confirm you’re choosing, tap your country/region and then touch yes.
  • Displays the Date/Time menu.
  • Choose the date, then contact next.
  • Choose the time, then touch done.

Setup Hp Officejet 3830 Wireless Printer

Step 3: Install the ink cartridges

  • Install your printer on the ink cartridge shipped in the box.
  • Open the door outside, then the door of the tin cartridge.
  • The printer’s chariot goes to the printing core.
  • Figure: The carriage to the printer centre Figure:
  • Before you continue waiting until the printer is idle and quiet.
  • Remove from your box one of the ink cartridges. Please take note to hit the ink cartridge only in black plastic.
  • Remove the protective ribbon.
  • Figure: Cut the tape and prevent contacts or ink nozzles from hitting
  • Push the fresh ink cartridge into the empty slot in a slight upward view and then push it up on the ink cartridge gently.
  • Insert in the left slot the three-color cartridge ().
  • Insert in the right slot the black ink cartridge ().
  • Figure: Insert new cartridge Figure
  • Repeat these measures with the other cartridge.
  • Open the entry door of the tin cartridge, and then close the outside door.
  • Figure: Close the entrance door ink cartridge

Step 4: Load paper in the network interface

  • Upon unpacking the printer, simply load white paper into the input tray.
  • Input tray increase. Input tray increase.
  • Figure: Input tray increase
  • Slide to the left the paper width guide.
  • Figure: Slide left the guide on paper width
  • Load plain white paper into the input tray, then drag down the stack until it ends.
  • Load clear white paper Figure:
  • Slide to the right the paper width guide to end at the paper edge.
  • Do not drive the guide to such a degree that the paper is tied.
  • Figure: Right slide the paper width manual
  • Take out the tray output and lift the extender of the tray.
  • Figure: Delete the output tray, and then increase the tray extensor.

Step 5: Align the ink cartridges

  • To achieve best print quality, the ink cartridges need to be matched.
  • Tap OK after loading the paper and the printer prints an alignment page automatically.
  • Head up the lid of the scanner.
  • Place the alignment page on the scanner glass on the printer side and position it around the glass in accordance with the graved guides.
  • Figure: On the scanner glass, position the alignment page
  • Close the deck of the scanner.
  • To scan the page and complete the alignment of the ink cartridge, tap OK.

Step 6: Install the printer software

  • Your hardware HP printer is now installed and printing software can be installed. Don’t try attaching your printing system to a machine until the printing software tells you.

Related Blog: Connect HP Officejet 5255 to Wifi

2nd way HP OfficeJet 3830 Wireless Printer Setup

You should make sure that you have completed simple setting such as connecting the printer to the power system, loading the paper and ink cartridge, completing the first setting of the printing pane and finishing off the wireless setting before beginning your HP OfficeJet 3830 Wireless Printer Setup. Once wireless configuration is over, the must be surfed and the driver mounted on the printer.

Steps to connect the HP OfficeJet 3830 printer to the wireless setup

  • After you set up the printer in general.
  • Drag to the printer panel settings option.
  • Then continue with the printer’s wireless wizard option.
  • Choosing the wireless alternative is often superior to the wired network.
  • As the wired network can lead to a problem when a network is connected and created secure.
  • Tap the wireless network choice and wait until your home router network is detected by the printer.
  • When you have the SSID of your home network on the list, pick the name of your router and enter your password to connect the printer to the wireless network.
  • You receive the software update notification on the printer panel when the network is connected.
  • You should browse to upgrade the app and update the software.

Contact Hp Services Team to Fix Hp Officejet 3830 Wireless Setup